Apraksts
The new PeakTech 3349 was specially developed for use in the craftsmanship and industry and offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight, which is used to illuminate the area where the measurement has to be taken. A multi-colored LED bar is located above the 6000-digit display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is found in NCV mode, yellow when measuring large capacities or flashes red when the phase tester mode is active (LIVE). In addition to the comprehensive measuring functions for current & voltage (True RMS), capacitance, resistance, frequency, continuity test and diode test, this device owns the functions to perform temperature measurements, non-contact voltage tests and phase tests. With the relative value mode and the data hold function, it is possible to make measurements accurate and precise.
Basic Accuracy DC: +/- 0,5%
Battery: 1,5V AAA
Capacitance max.: 60 mF
Display Type: LCD
Info-LEDs: ■
LED-lamp: ■
NCV: ■
Over voltage category: CAT III 600 V
Range selection: Manual
True RMS: ■
V DC max.: 600V
A AC max.: 10A
Hz max.: 10 MHz
OHM max.: 60 MΩ
Temp. max.: 1000 °C
Temp. min.: -18 °C
mA DC max.: 600mA
mV DC max.: 600 mV
µA DC max.: 60 µA
V AC max.: 600 V
A DC max.: 10A
mA AC max.: 600 mA
